Introduction

Demonstrate the tear-down process and the removal of a broken speaker in the Bolide Technology Group Dual Alarm Clock, so that others looking to replace the speaker have a basis to build from.

Slide the clear plastic case off of the speaker Slide the clear plastic case off of the speaker Slide the clear plastic case off of the speaker
  • Slide the clear plastic case off of the speaker

Add Comment

Remove the batteries on the bottom of the radio Locate and remove the five screws on the bottom of the radio with a Philips Head Screwdriver. Make sure to keep your screws together so you don't lose them.
  • Remove the batteries on the bottom of the radio

  • Locate and remove the five screws on the bottom of the radio with a Philips Head Screwdriver.

  • Make sure to keep your screws together so you don't lose them.

Add Comment

Grab your nylon pry tool and wedge it between the outer case and the top of the radio. Slowly pry open the top and remove it. This may be more difficult to take off if the top hasn't been removed before, but it may be easier to turn the clock upside down for this step. This may be more difficult to take off if the top hasn't been removed before, but it may be easier to turn the clock upside down for this step.
  • Grab your nylon pry tool and wedge it between the outer case and the top of the radio. Slowly pry open the top and remove it.

  • This may be more difficult to take off if the top hasn't been removed before, but it may be easier to turn the clock upside down for this step.

Add Comment

  • Using a black nylon spudger to carefully break the glue around the outside of the speaker so it can be dislodged.

Add Comment

Locate the speaker plug for the speaker you wish to remove and slightly tug on it until it becomes unplugged This can also be done with a pair of tweezers if you find there isn't enough space. This can also be done with a pair of tweezers if you find there isn't enough space.
  • Locate the speaker plug for the speaker you wish to remove and slightly tug on it until it becomes unplugged

  • This can also be done with a pair of tweezers if you find there isn't enough space.

Add Comment

After the speaker cord is removed, pull the speaker straight up and out of the radio. After the speaker cord is removed, pull the speaker straight up and out of the radio.
  • After the speaker cord is removed, pull the speaker straight up and out of the radio.

Add Comment

Once the speaker is removed, the inside of the dual alarm clock should look identical to the photo shown. Once the speaker is removed, the inside of the dual alarm clock should look identical to the photo shown.
  • Once the speaker is removed, the inside of the dual alarm clock should look identical to the photo shown.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mercy Adeshola

Member since: 02/20/2017

101 Reputation

1 Guide authored

Team

USF Tampa, Team 10-1, Remmell Spring 2017 Member of USF Tampa, Team 10-1, Remmell Spring 2017

USFT-REMMELL-S17S10G1

4 Members

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 123