This translation may not reflect the most recent updates from the source guide. Help update the translation or view the source guide.
Introduction
Is your Blue Yeti is tired, the USB is sometimes capricious, or it simply turns on but is not recognized by the computer? Here is surely the solution to your problem.
What you need
-
-
-
Defective part to be replaced
-
Just test it with a multimeter in sound mode.
-
If the beep is continuous, the problem lies elsewhere.
-
If the multimeter does not beep, or jerks, the component should be changed.
Ask FixBot
-
-
-
To reassemble your device, follow the instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
66%
Corbanizer is helping us fix the world! Want to contribute?
Start translating ›
