Blackberry Curve 8320 Front Panel Replacement

Step 1 Battery



• Hold the phone with the back facing you.
• Press the silver tab down and remove the cover.
Step 2

• Pull up on the top edge of the battery to remove it.
Step 3 Front Panel
• Use a plastic opening tool to gently pry the bottom cover loose.
• Do not use excessive force at risk of damaging the antenna, which is under this casing.
• Pull the cover from the front of the phone after the back is loose.
Step 4
• Remove the two top screws with a T5 Torx screwdriver.
• The screws are 8mm long.
Step 5
• Gently pry off the top of the side casings.
• The side casings cannot be fully removed yet because they are screwed on at the bottom.
Step 6
• Use a plastic opening tool to detach the securing clips holding the the front panel in place.
• There are six securing clips total.
Step 7
• Remove the front panel.
• You may need to apply some force because the front panel is attached to the rest of the device with adhesive.

Author

with 10 other contributors

Christopher Aiello

Member since: 10/12/11

89 Reputation

5 Guides authored

Badges: 8

• 
• 
• 

+5 more badges

Team

Cal Poly, Team 3-6, Regan Fall 2011 Member of Cal Poly, Team 3-6, Regan Fall 2011

CPSU-REGAN-F11S3G6

5 Members

9 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview