Parts

No parts required.

Image 1/2: Remove the plastic backplate by pulling up on the bottom of the cover. Image 2/2: Remove the plastic backplate by pulling up on the bottom of the cover.
  • Place the phone on a flat surface with the screen facing down.

  • Remove the plastic backplate by pulling up on the bottom of the cover.

Add Comment

Image 1/1:
  • Remove the battery by pulling up from the top of the battery.

Add Comment

Image 1/2: Warning: One screw will have warranty tape covering the screw. Removing this screw will likely void the phones warranty. Image 2/2: Warning: One screw will have warranty tape covering the screw. Removing this screw will likely void the phones warranty.
  • Remove the two screws midway up the phone on the left and right sides using a T6 Torx Screwdriver.

  • Warning: One screw will have warranty tape covering the screw. Removing this screw will likely void the phones warranty.

Add Comment

Image 1/2: Insert a plastic spudger into the screen where speaker resides. Image 2/2: I recommend going from the side. There are two layers to the cover. You need to make sure you get underneath the bottom layer if you plan on reusing this cover.
  • Flip the phone over so the keyboard faces up.

  • Insert a plastic spudger into the screen where speaker resides.

  • I recommend going from the side. There are two layers to the cover. You need to make sure you get underneath the bottom layer if you plan on reusing this cover.

  • Gently lift up plastic screen cover until screen cover separates from screen.

  • Continue until screen cover is completely removed.

Add Comment

Image 1/3: Slide the tool around the entire perimeter of the phone until the plastic siding is completely removed. Image 2/3: Slide the tool around the entire perimeter of the phone until the plastic siding is completely removed. Image 3/3: Slide the tool around the entire perimeter of the phone until the plastic siding is completely removed.
  • Insert the spudger into the top of the plastic siding on the front of the phone and lift up until the siding lifts up.

  • Slide the tool around the entire perimeter of the phone until the plastic siding is completely removed.

Add Comment

Image 1/2: Image 2/2:
  • The keyboard should slide off of the phone now that the plastic siding has been removed.

Add Comment

Conclusion

To reassemble the device, follow the instructions in reverse order.

4 other people completed this guide.

Cory Davis

Member since: 04/19/2011

503 Reputation

3 Guides authored

Team

Cal Poly, Team 15-13, Regan Spring 2011 Member of Cal Poly, Team 15-13, Regan Spring 2011

CPSU-REGAN-S11S15G13

3 Members

5 Guides authored

One Comment

This is a handy technique I will use it when next time I fix my phone and if you get time do visit us we fix these type of problems in India, Kolkata here is our site link https://techyuga.com/kolkata/

Ankita - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 6,121