Parts

No parts required.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Add Comment

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Add Comment

Lift off the back cover.
  • Lift off the back cover.

Add Comment

Remove the two T6 screws.
  • Remove the two T6 screws.

Add Comment

Remove the daughterboard. Remove the exposed vibration motor.
  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nick Alejandro

Member since: 01/24/2010

3 Reputation

1 Guide authored

Team

Cal Poly, Team 14-44, Regan Winter 2010 Member of Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 2,448