Fix Your Stuff Community Store

Black and Decker WP900 Exterior Casing Replacement

Introduction

This page gives instructions for disassembling the Black and Decker WP900 6-Inch Orbital Waxer and Polisher to where the external casing can be removed from all internal workings.

What you need

  1. Black and Decker WP900 Exterior Casing Replacement, Exterior Casing: step 1, image 1 of 1

    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

    Edit

  2. Black and Decker WP900 Exterior Casing Replacement: step 2, image 1 of 1

    • Using the Phillips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

    Edit

  4. Black and Decker WP900 Exterior Casing Replacement: step 3, image 1 of 3 Black and Decker WP900 Exterior Casing Replacement: step 3, image 2 of 3 Black and Decker WP900 Exterior Casing Replacement: step 3, image 3 of 3

    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

    Edit

  5. Black and Decker WP900 Exterior Casing Replacement: step 4, image 1 of 1

    • Using the Phillips #1 screwdriver, remove the two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

    Edit

    why the circular head wobbling, was it get loose, how do i fix it

    Naruto Antujipun - Reply

  6. Black and Decker WP900 Exterior Casing Replacement: step 5, image 1 of 2 Black and Decker WP900 Exterior Casing Replacement: step 5, image 2 of 2

    • Gently pull the power cord out from the control module.

    • Remember, when reassembling the device, the black wire should be on the top.

    Edit

  7. Black and Decker WP900 Exterior Casing Replacement: step 6, image 1 of 1

    • Firmly grasping the motor dislodge the internal components from the frontal external casing.

    • Once the motor has been removed, the external casing can now be replaced.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

David Hutchings

Member since: 03/28/16

101 Reputation

1 Guide authored

Badges: 2

Team

IUPUI, Team 8-8, Wilson Spring 2016 Member of IUPUI, Team 8-8, Wilson Spring 2016

IUPUI-WILSON-S16S8G8

4 Members

4 Guides authored

One Comment

Hello, this is Adam Kinnett from Group 7. You have done an excellent job on your photos as well as the descriptions and formatting.

**One of your Wiki pages on the search says "Back and Decker".

Adam Kinnett - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 880