Introduction

This guide will show you how to remove the entire blade holder assembly if it were to ever get broken.

Parts

Remove the nine torx 15.875mm  screws on the front of the jigsaw using a T-15 torx screwdriver. Remove the nine torx 15.875mm  screws on the front of the jigsaw using a T-15 torx screwdriver.
  • Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.

Add Comment

By separating the two housing halves, carefully remove the top plate.
  • By separating the two housing halves, carefully remove the top plate.

Add Comment

Being careful to keep all parts together, grab the entire assembly and pull it directly out of the saw.
  • Being careful to keep all parts together, grab the entire assembly and pull it directly out of the saw.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

matt murray

Member since: 01/27/2017

634 Reputation

6 Guides authored

Team

Cal Poly, Team 22-9, Maness Winter 2017 Member of Cal Poly, Team 22-9, Maness Winter 2017

CPSU-MANESS-W17S22G9

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 38

All Time: 239