Fix Your Stuff Community Store

Black and Decker DCM100R Reservoir Tube Replacement

Introduction

This guide covers the removal and replacement of the reservoir tube for the Black and Decker DCM100R. This guide is meant to fix the issue of water not flowing properly through the device. Before following this guide check for other possible causes on the trouble shooting page.

What you need

  1. Black and Decker DCM100R Reservoir Tube Replacement, Shower Head: step 1, image 1 of 1

    • Open the lid.

    Edit

  2. Black and Decker DCM100R Reservoir Tube Replacement: step 2, image 1 of 3 Black and Decker DCM100R Reservoir Tube Replacement: step 2, image 2 of 3 Black and Decker DCM100R Reservoir Tube Replacement: step 2, image 3 of 3

    • Using the jimmy, pry the shower head out of place

    Edit

  4. Black and Decker DCM100R Reservoir Tube Replacement: step 3, image 1 of 3 Black and Decker DCM100R Reservoir Tube Replacement: step 3, image 2 of 3 Black and Decker DCM100R Reservoir Tube Replacement: step 3, image 3 of 3

    • Turn the shower head 90 degrees and remove it.

    Edit

  5. Black and Decker DCM100R Reservoir Tube Replacement, Reservoir Tube: step 4, image 1 of 2 Black and Decker DCM100R Reservoir Tube Replacement, Reservoir Tube: step 4, image 2 of 2

    • Remove the hinge containing the reservoir tube.

    Edit

  6. Black and Decker DCM100R Reservoir Tube Replacement: step 5, image 1 of 2 Black and Decker DCM100R Reservoir Tube Replacement: step 5, image 2 of 2

    • Pull out and replace the reservoir tube.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 97