Fix Your Stuff Community Store

Bissell SpotClean ProHeat 5207U Water Pump Replacement

Introduction

Is your Bissell SpotClean ProHeat 5207U not spraying water? It could be because of a failing water pump. Follow this guide to replace the water pump for your Bissell SpotClean ProHeat 5207U.

What you need

  1. Bissell SpotClean ProHeat 5207U Water Pump Replacement, Water Pump: step 1, image 1 of 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement, Water Pump: step 1, image 2 of 2

    • Ensure the device is unplugged.

    • Make sure that you have removed both the clean and dirty water tank so that you can unscrew the proper screws.

    • Remove the marked 19.7 mm screws on the underside of the device using the Phillips #00 screwdriver.

    Edit

  2. Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 2, image 1 of 3 Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 2, image 2 of 3 Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 2, image 3 of 3

    • Remove the plastic top located where the dirty water tank was previously situated.

    • Using the Phillips #00 screwdriver, unscrew the three 17.2 mm screws.

    • Remove the plastic lip that was previously held by the screws.

    Edit

  4. Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 3, image 1 of 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 3, image 2 of 2

    • Using pliers, pinch the hose clamp tabs together, then remove the clamp.

    • Remove the water hose from the water pump.

    Edit

  5. Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 4, image 1 of 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 4, image 2 of 2

    • Remove the green wire by pulling it away from the pump.

    • Be careful not to bend where the wire is plugged into.

    Edit

  6. Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 5, image 1 of 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 5, image 2 of 2

    • Pull the clear hose away from the pump until it is removed.

    Edit

  7. Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 6, image 1 of 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement: step 6, image 2 of 2

    • Remove the zip tie from the water pump.

    • Replace the old water pump with the new water pump.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 18

All Time: 132