Skip to main content

Introduction

This guide will show you the steps necessary to remove the capacitor in the Bendix Magneto. A worn out capacitor can cause an excessive RPM drop on the left or right aircraft magneto.

Parts

No parts specified.

  1. Use the #2 Flathead screwdriver to remove the five screws on the body of the magneto.
    • Use the #2 Flathead screwdriver to remove the five screws on the body of the magneto.

  2. Locate the two screws on the back of the magneto that holds the capacitor in place.
    • Locate the two screws on the back of the magneto that holds the capacitor in place.

  3. Use the #2 Flathead screwdriver to remove the two screws.
    • Use the #2 Flathead screwdriver to remove the two screws.

  4. Remove the Capacitor and replace it.
    • Remove the Capacitor and replace it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Kelsi English

Member since: 09/26/2012

426 Reputation

5 Guides authored

Team

Cal Poly, Team 1-2, Propen Fall 2012 Member of Cal Poly, Team 1-2, Propen Fall 2012

CPSU-PROPEN-F12S1G2

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 30

All Time: 3,559