Parts

No parts required.

Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that hold it together.
  • Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that hold it together.

Add Comment

After unscrewing the six screws,  pull the the device apart to reveal where the antenna meets the long white wire.
  • After unscrewing the six screws, pull the the device apart to reveal where the antenna meets the long white wire.

Add Comment

Deck the Halls
With tools and Fix Kits
Remove the 4.5 mm screw  on the remote that holds the antenna in place to set it loose.
  • Remove the 4.5 mm screw on the remote that holds the antenna in place to set it loose.

Add Comment

Replace the old antenna with a new one. Attach the new antenna to the white wire and screw it in place.
  • Replace the old antenna with a new one. Attach the new antenna to the white wire and screw it in place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Amber Ashley

Member since: 10/01/2015

329 Reputation

4 Guides authored

Team

USF Tampa, Team 1-6, Leahy Fall 2015 Member of USF Tampa, Team 1-6, Leahy Fall 2015

USFT-LEAHY-F15S1G6

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 107