Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.
Introduction
Go to step 1 ↓Step for before you begin working on the Logitech RS H‑Shifter.
What you need
Tools
-
-
-
Unplug the H‑Shifter's USB cable.
-
Completely unmount the shifter from the clamp and remove any accessories so you're left with just the shifter.
-
Use a 4.0 mm hex screwdriver to remove the 31 mm‑long screws securing the shifter to the clamp.
-
-
-