Introduction
This guide will show you how to access the insides of your Beboncool Pro Switch Controller by removing the back plate.
What you need
-
-
-
Place the controller down with the back facing up.
-
Remove the seven Phillips #00 screws from the back plate.
Ask FixBot
-
-
-
-
Separate the back plate from the rest of the controller using an opening tool.
-
Detach the cable connecting the back plate to the rest of the controller.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Team
Grand Valley State University, Team S4-G3, DeVasto Fall 2019 Member of Grand Valley State University, Team S4-G3, DeVasto Fall 2019
GVSU-DEVASTO-F19S4G3
6 Members
11 Guides authored
