Fix Your Stuff Community Store

Beats Studio 2.0 Wireless Left Interior Side Panel Replacement

Introduction

The casing and structure of Beats by Dre Studio 2.0 over-ear headphones directly influence their sound quality. When the interior side panel is compromised, a proper seal (to one's ears) is not achievable, and ultimately sound quality is severely lessened. This guide will provide thorough instructions on how to replace the interior side paneling and restore optimal sound quality.

What you need

  1. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement, Left Interior Side Panel: step 1, image 1 of 1

    • Use metal spudger to pry away ear cushion.

    Edit

  2. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 2, image 1 of 1

    • Remove ear cushion from headphones (attached by adhesive).

    Edit

  3. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 3, image 1 of 1

    • Remove two screws from the metal hinge using a Phillips head screwdriver to allow more motion from the speaker housing and more accessibility.

    Edit

  4. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 4, image 1 of 1

    • Remove five screws using a Phillips head screwdriver from speaker housing.

    Edit

  6. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 5, image 1 of 1

    • Pull speaker away to access second secondary housing.

    • Be careful not to stress wires and break solder points.

    Edit

  7. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 6, image 1 of 2 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 6, image 2 of 2

    • Raise center cover.

    • Remove screw from center of housing.

    Edit

  8. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 7, image 1 of 1

    • Pull secondary housing away gently being careful not to damage the wires.

    Edit

  9. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 8, image 1 of 1

    • Remove four screws using a Phillips head screwdriver to remove the third housing.

    Edit

  10. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 9, image 1 of 3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 9, image 2 of 3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 9, image 3 of 3

    • Disconnect wires gently.

    • Be gentle with the wires ensuring to pull them through with care to eliminate possible shortages.

    Edit

  11. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 10, image 1 of 3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 10, image 2 of 3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 10, image 3 of 3

    • Pass wire through new housing and reconnect wires.

    Edit

  12. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: step 11, image 1 of 1

    • Snap housing into place.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 3 other contributors

Antares Cam

Member since: 02/27/18

235 Reputation

1 Guide authored

Badges: 7

+4 more badges

Team

colby and cameron Member of colby and cameron

Community

2 Members

1 Guide authored

2 Comments

Thank you for your tutorial!

Jonathan Concepcion - Reply

appreciate it, fixed both side panels on my beats

mridha31 - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 15

All Time: 5,591