Introduction
This guide will walk you through the process of replacing a spent fuse in a Bear 1000 Ventilator. Found on page 89 in the full service manual.
What you need
-
-
-
Use a screwdriver to push in and turn the fuse holder counterclockwise until it disengages.
Ask FixBot
-
-
-
Retain the cap which holds the fuse, and replace the fuse in the cap with a new appropriately rated fuse.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team S7-G12, Paton Fall 2020 Member of Cal Poly, Team S7-G12, Paton Fall 2020
CPSU-PATON-F20S7G12
2 Members
66 Guides authored
