Fix Your Stuff Community Store

Bear 1000 Filter Replacement

Medical Equipment
Neither iFixit nor this repair guide is endorsed by or affiliated with the medical device manufacturer.

Introduction

This guide will walk you through the process of replacing the ambient air intake filters in a Bear 1000 Ventilator. Found on page 97 in the full service manual.

What you need

    • Turn off the ventilator and disconnect from AC power and pressurized gas at the wall sources.

    Edit

  2. Bear 1000 Filter Replacement: step 2, image 1 of 1

    • Open the ventilator by removing the console retaining screw.

    Edit

    • Vacuum all surfaces inside the ventilator. Be sure to reach areas around connectors, circuit boards and pneumatic assembies.

    Edit

    • Remove old filters in back panel and replace with new ones.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Eli Ferman

Member since: 04/08/20

607 Reputation

4 Guides authored

Badges: 7

+4 more badges

Team

Cal Poly, Team S7-G12, Paton Fall 2020 Member of Cal Poly, Team S7-G12, Paton Fall 2020

CPSU-PATON-F20S7G12

2 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 3

All Time: 92