Introduction

The bands of the Basis Peak allow for several size adjustments for a snug fit to the user's wrist. A properly adjusted band is crucial to the functioning of the sensor on the underside of the watch. If the band is damaged or visibly tarnished, users can easily replace it with this guide. Two spring latches on the underside of the band halves must be released and the band halves will come right off.

Parts

No parts required.

Image 1/1: Keep the watch in this position to help you follow the rest of the guide.
  • Flip the watch over to view the back panel and sensor. Arrange the watch so that the band clasp is away from you.

  • Keep the watch in this position to help you follow the rest of the guide.

Add Comment

Image 1/1:
  • Release the spring latches on the underside of each band to remove the bands from the frame.

Add Comment

Conclusion

To reattach the bands, follow these instructions in reverse order.

Alexander Halliwell

Member since: 03/26/2017

201 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 65