Introduction

The back plate of this watch can be replaced if it becomes scratched or is broken. It is able to be replaced very easily. The process includes using a screwdriver to remove the four screws on the back plate. Then a new back plate can be added in place of the old one.

Wedge a plastic opening tool between band contacts.
  • Wedge a plastic opening tool between band contacts.

Add Comment

Push in plastic opening tool until the components click and pop out of the holder.
  • Push in plastic opening tool until the components click and pop out of the holder.

  • Repeat steps for other band.

Add Comment

Remove four 4mm screws using a PH000 screwdriver.
  • Remove four 4mm screws using a PH000 screwdriver.

  • Remove back plate.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Kaitlyn Lee

Member since: 11/06/2017

518 Reputation

4 Guides authored

Team

IUPUI, Team S6-G1, Baechle Fall 2017 Member of IUPUI, Team S6-G1, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G1

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 34