Skip to main content

Free Shipping on Domestic Orders $75+

Base

Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.
    1. Base, Lower the device down: step 1, image 1 of 3 Base, Lower the device down: step 1, image 2 of 3 Base, Lower the device down: step 1, image 3 of 3
      • Before beginning repairs, disconnect the device from power, disconnect all hoses, drain and depressurize the system, and let the device cool if the heater was recently used.

      • Lower the device down so it is laying on its backside, bottom facing out.

      Ask FixBot

      Add Comment

    2. Base, Remove the wing nuts: step 2, image 1 of 1
      • Remove the two wing nuts securing the base to the device.

      • The base is heavy, so be prepared to lower it down slowly once the wing nuts are removed.

      Ask FixBot

      Add Comment

    3. Base, Lower the base down: step 3, image 1 of 3 Base, Lower the base down: step 3, image 2 of 3 Base, Lower the base down: step 3, image 3 of 3
      • Lower the base down until the swivel wheels touch the ground.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Carsten Frauenheim

Member since: 03/10/20

171,406 Reputation

442 Guides authored

Team

iFixit Member of iFixit

Staff

122 Members

72,401 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 122