Introduction
To gain access to the hard drive and random access memory, removal of the back plate is required.
What you need
-
-
Turn the laptop over to place it top down.
-
Use a Phillips #1 screwdriver to remove the screw holding in the back plate. This screw does not come out of the plate.
-
Lift the back plate off the laptop, exposing the RAM and Hard Disk.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Washington State, Team S1-G5, Lobnitz Spring 2018 Member of Washington State, Team S1-G5, Lobnitz Spring 2018
WSU-LOBNITZ-S18S1G5
4 Members
18 Guides authored
