Introduction

In this guide, you will learn how to remove and replace the individual LED lights inside the device

Place the device face down on a flat surface, so that the screws on the back are facing the ceiling.
  • Place the device face down on a flat surface, so that the screws on the back are facing the ceiling.

Using a screwdriver loosen the four screws connecting the body of the device together.
  • Using a screwdriver loosen the four screws connecting the body of the device together.

Once unscrewed, pop the back of the device off using the plastic opening tool.
  • Once unscrewed, pop the back of the device off using the plastic opening tool.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Once unscrewed, take the back of the body and put it aside. We will be working with the front part of the device.
  • Once unscrewed, take the back of the body and put it aside. We will be working with the front part of the device.

Using  a screwdriver loosen the screws on the lights panel.
  • Using a screwdriver loosen the screws on the lights panel.

Using a plastic opening tool pop the light panel off. Be careful as to not rip any of the wires from the panel.
  • Using a plastic opening tool pop the light panel off. Be careful as to not rip any of the wires from the panel.

Carefully pull the LED lights off with a pair of tweezers. Once off, put in and connect a replacement. Carefully pull the LED lights off with a pair of tweezers. Once off, put in and connect a replacement.
  • Carefully pull the LED lights off with a pair of tweezers. Once off, put in and connect a replacement.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Shreya Sunny

Member since: 09/04/2015

604 Reputation

6 Guides authored

Team

USF Tampa, Team 2-2, Sullivan Fall 2015 Member of USF Tampa, Team 2-2, Sullivan Fall 2015

USFT-SULLIVAN-F15S2G2

4 Members

7 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 95