Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

The (0.7W) speaker may need to be repaired or replaced if it is not working properly.

Parts

No parts specified.

  1. Pry the back cover from the bottom of the phone, pulling outwards and upwards.
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. Fully remove the cover and set aside in a safe place.
    • Fully remove the cover and set aside in a safe place.

  3. Remove all the nine 2mm screws using the JIS #00 Screwdriver.
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  4. Pry the frame off using the spudger pulling upwards going to different areas around the device.
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

  5. Use the spudger to pry out the speaker from the Frame Cover. Use the spudger to pry out the speaker from the Frame Cover. Use the spudger to pry out the speaker from the Frame Cover.
    • Use the spudger to pry out the speaker from the Frame Cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 96