Introduction

This guide provides steps on how to remove and replace the back cover of the Blu Studio 7.0 II.

Locate the seam between the black and silver pieces of the phone.
  • Locate the seam between the black and silver pieces of the phone.

  • Insert a plastic opening tool into the seam and firmly pry the black back piece away from the silver front piece.

  • To create the initial separation for the plastic opening tool, you may need to use either a spudger or metal spudger. If you use a metal spudger, be aware this can damage your phone if you aren't careful.

Add Comment

Work your way around the edge of phone, firmly prying the pieces apart.
  • Work your way around the edge of phone, firmly prying the pieces apart.

Add Comment

Once the back has been removed, you can snap the new one into place by pressing firmly around the edges with your fingers. Once the back has been removed, you can snap the new one into place by pressing firmly around the edges with your fingers.
  • Once the back has been removed, you can snap the new one into place by pressing firmly around the edges with your fingers.

Add Comment

Finish Line

3 other people completed this guide.

Abby

Member since: 05/14/2016

768 Reputation

5 Guides authored

Team

Metro State, Team 1-2, Carpenter SU 2016 Member of Metro State, Team 1-2, Carpenter SU 2016

MSU-CARPENTER-SU16S1G2

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 32

All Time: 605