Introduction

This guide will show you a step by step guide on how to replace a camera on the BLU Studio 5.0 S II.

  1. Remove the back cover of phone with the plastic opening tool.
    • Remove the back cover of phone with the plastic opening tool.

    Add Comment

  2. Remove the battery with the plastic opening tool.
    • Remove the battery with the plastic opening tool.

    Add Comment

    • Use the Philips #00 screwdriver to remove the nine screws that the top back part of the phone has.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Once you take off the screws off the phone remove the plastic backing .

    Add Comment

    • Remove the ribbon cable carefully on all four sides of the motherboard of the phone.

    Add Comment

    • Take off the four interior screws that are on the motherboard of the phone.

    Add Comment

    • Remove the ribbon cable next to the camera carefully.

    Add Comment

    • Remove the motherboard of the phone and replace camera.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Maria Juzaino

Member since: 10/25/2014

499 Reputation

3 Guides authored

Team

Gateway, Team 1-3, Johnson Fall 2014 Member of Gateway, Team 1-3, Johnson Fall 2014

GCC-JOHNSON-F14S1G3

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 1,899