Introduction

The front facing camera is located on the front side of the top motherboard. In order to access it, the motherboard just has to be exposed and then gently lifted. Use caution while disconnecting the front camera from the motherboard because it is easily damaged.

Pry open and remove back cover with plastic opening tools. Pry open and remove back cover with plastic opening tools. Pry open and remove back cover with plastic opening tools.
  • Pry open and remove back cover with plastic opening tools.

Add Comment

Remove the seven 4mm JIS J000 screws from top plate Remove top plate
  • Remove the seven 4mm JIS J000 screws from top plate

  • Remove top plate

Add Comment

Flip up the black retaining flap on the front-facing camera ZIF connector. Gently lift up the motherboard, and pull the front-facing camera free of the device. Gently lift up the motherboard, and pull the front-facing camera free of the device.
  • Flip up the black retaining flap on the front-facing camera ZIF connector.

  • Gently lift up the motherboard, and pull the front-facing camera free of the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Sishun Wang

Member since: 02/08/2016

576 Reputation

4 Guides authored

Team

USF Tampa, Team 12-2, Eyestone Spring 2016 Member of USF Tampa, Team 12-2, Eyestone Spring 2016

USFT-EYESTONE-S16S12G2

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 154