Introduction

This guide gives quick steps to replace the battery on the BLU Dash 3.5.

Parts

Image 1/3: Insert the opening tool into the slot. Image 2/3: Pry the back cover off. Once the corner is off, continue around the perimeter of the phone pulling the back off with your fingers. Image 3/3: A fingernail can work to open the back in place of an opening tool.
  • Start by locating the slot on the lower right corner of the device.

  • Insert the opening tool into the slot.

  • Pry the back cover off. Once the corner is off, continue around the perimeter of the phone pulling the back off with your fingers.

  • A fingernail can work to open the back in place of an opening tool.

Add Comment

Image 1/2: Insert your thumb and pull the battery out. Image 2/2: Insert your thumb and pull the battery out.
  • Locate the indentation at the bottom of the battery.

  • Insert your thumb and pull the battery out.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Aaron Boehm

Member since: 03/01/2017

201 Reputation

2 Guides authored

Team

IUPUI, Team S1-G2, Harley Spring 2017 Member of IUPUI, Team S1-G2, Harley Spring 2017

IUPUI-HARLEY-S17S1G2

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 80