Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

All of the key components that could fail are accessed by removing the Azpen A720 back cover. The process will include removing a couple of screws and then utilizing the plastic opening tool to pry the cover apart from the body of the device.

  1. Use a Phillips #00 screwdriver to remove the two 4mm screws found on the top edge of the tablet near the power button. Use a Phillips #00 screwdriver to remove the two 4mm screws found on the top edge of the tablet near the power button.
    • Use a Phillips #00 screwdriver to remove the two 4mm screws found on the top edge of the tablet near the power button.

  2. Use the plastic opening tool to pry the white back from the silver frame. Start near the micro SD slot. Slide the plastic opening tool around the perimeter of the casing until the back is disconnected. Slide the plastic opening tool around the perimeter of the casing until the back is disconnected.
    • Use the plastic opening tool to pry the white back from the silver frame. Start near the micro SD slot.

    • Slide the plastic opening tool around the perimeter of the casing until the back is disconnected.

  3. Remove the rear casing.
    • Remove the rear casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.


Ben

Member since: 03/18/2015

280 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 292