Fix Your Stuff Community Store

Axess SPBT1031 Black Faceplate Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Axess SPBT1031 Black Faceplate Replacement, Black Faceplate: step 1, image 1 of 1

    • Look at the side of the speaker that has the red interface plate. Using a Phillips head PH1 screwdriver head, remove screws on the top and bottom of the black face plate. There will be one screw on top and one on the bottom.

    • Both screws are 0.55 cm in depth

    Edit

  3. Axess SPBT1031 Black Faceplate Replacement: step 2, image 1 of 1

    • Separate the black face plate from the tube by pulling them apart.

    • Be careful when pulling the wires apart or it will potentially damage the wires due to over stretching.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Michael Bradley

Member since: 03/07/16

510 Reputation

2 Guides authored

Badges: 10

+7 more badges

Team

UMass Dartmouth, Team 8-6, Botvin Spring 2016 Member of UMass Dartmouth, Team 8-6, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G6

3 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 36