Skip to main content

Audiovox Tri-mode CDM-9000 Keypad Replacement

What you need

  1. Audiovox Tri-mode CDM-9000 Keypad Replacement, Keypad: step 1, image 1 of 3 Audiovox Tri-mode CDM-9000 Keypad Replacement, Keypad: step 1, image 2 of 3 Audiovox Tri-mode CDM-9000 Keypad Replacement, Keypad: step 1, image 3 of 3
    • Flip your phone over so the screen is facing down.

    • About half way down there is a small button with a few groves. Push this button in an upward fashion. This will release the battery from the back of the cell phone.

  2. Audiovox Tri-mode CDM-9000 Keypad Replacement: step 2, image 1 of 3 Audiovox Tri-mode CDM-9000 Keypad Replacement: step 2, image 2 of 3 Audiovox Tri-mode CDM-9000 Keypad Replacement: step 2, image 3 of 3
    • Once the battery has been removed, you will need a small Phillips 60 mm screwdriver. Remove the two 1.2mm Phillips #1 screws on the back of the phone.

    • Use a spudger tool to pry apart the phone. It may be a little difficult to pry open. Use the flat part of the spudger tool and go all around the phone. It will come apart.

  3. Audiovox Tri-mode CDM-9000 Keypad Replacement: step 3, image 1 of 3 Audiovox Tri-mode CDM-9000 Keypad Replacement: step 3, image 2 of 3 Audiovox Tri-mode CDM-9000 Keypad Replacement: step 3, image 3 of 3
    • Once you have the phone apart simply remove the key pad and replace it with the new one.

    • Don't forget to put the screws back in. Place the battery back on the phone.

    • Push the two parts of the phone back together. You will here a loud click when the phone is back together.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Summer Sines

Member since: 09/27/14

406 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 14

All Time: 232