Introduction

We will show you how to open the laptop and change / upgrade the HDD (hard disk drive).


Please SUBSCRIBE to my channel ツ

Video Overview

Switch off the Laptop and remove the Battery. Unscrew the two Philips screws and remove the HDD / RAM Cover. Unscrew the two Philips screws and remove the HDD / RAM Cover.
  • Switch off the Laptop and remove the Battery.

  • Unscrew the two Philips screws and remove the HDD / RAM Cover.

Add Comment

Remove three screws securing the hard drive caddy (hard drive assembly). Slide the hard drive assembly to the left to disconnect it from the motherboard. Slide the hard drive assembly to the left to disconnect it from the motherboard.
  • Remove three screws securing the hard drive caddy (hard drive assembly).

  • Slide the hard drive assembly to the left to disconnect it from the motherboard.

Add Comment

Remove the two Philips screws and separate the HDD from the caddy case.
  • Remove the two Philips screws and separate the HDD from the caddy case.

  • You can install 2.5" SATA HDD, 5400rpm / 7200rpm, 320GB / 500GB / 750GB /1TB.

  • After changing / upgrading the HDD you must install an operating system or clone & copy the information from the old HDD to the new one.

  • .

  • Did you do it successfully.

  • Please SUBSCRIBE to my channel ツ

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

ZFix

Member since: 12/09/2013

131,916 Reputation

387 Guides authored

Team

Master Techs Member of Master Techs

Community

266 Members

635 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 15

Past 30 Days: 136

All Time: 4,329