Parts

No parts required.

Remove the following six screws:
  • Remove the following six screws:

    • Six 4 mm Phillips #0 using a phillips scredriver

  • Remove the following one screw:

    • One 14 mm Phillips #0 using a phillips screwdriver

  • The 14mm screw goes in the center.

There are also two other screws under the rubber feet above the battery.

digg1024 - Reply

Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
  • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

How exactly does the keyboard pod out ? It doesn’t come off at the screen hinge.

Clément Marshall - Reply

Take gold cap that connects to a black wire off using the metal spudger.
  • Take gold cap that connects to a black wire off using the metal spudger.

Add Comment

Remove the following two screws:
  • Remove the following two screws:

    • Two 4 mm screws using Phillips #0 screwdriver.

Add Comment

Slide the component up and out.
  • Slide the component up and out.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Vanessa Garcia

Member since: 01/22/2015

1,424 Reputation

6 Guides authored

Team

Cal Poly, Team 21-24, Maness Winter 2015 Member of Cal Poly, Team 21-24, Maness Winter 2015

CPSU-MANESS-W15S21G24

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 17

Past 30 Days: 65

All Time: 1,779