What you need
-
-
Remove the following six screws:
-
Six 4 mm screws using a Phillips #0 screwdriver.
-
Remove the following one screw:
-
One 14 mm screw using a Phillips #0 screwdriver.
Ask FixBot
-
-
-
-
Take two rubber caps off the back side of the laptop.
-
Use a Phillips #0 screwdriver to remove the two 14 mm screws under the rubber caps.
-
-
-
Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Team
Cal Poly, Team 21-24, Maness Winter 2015 Member of Cal Poly, Team 21-24, Maness Winter 2015
CPSU-MANESS-W15S21G24
4 Members
8 Guides authored
