Make sure power is off.
  • Make sure power is off.

  • Insert plastic opening tool on the side of the tablet.

  • You can use a thin screwdriver if you don't have an opening tool.

  • Gently pull upwards and carefully pry open the Transformer pad.

Slide the tool along all four edges and continue to pull the tool upwards.
  • Slide the tool along all four edges and continue to pull the tool upwards.

Remove the back cover once it is detached and set it aside.
  • Remove the back cover once it is detached and set it aside.

  • Rotate tablet to match picture to make the guide easier to follow

New Battery = Faster iPhone
Fix Kits starting at $16.99
Remove the tape and unplug wire that attaches to both speakers from soundboard.
  • Remove the tape and unplug wire that attaches to both speakers from soundboard.

Use the +J000 screwdriver to unscrew and remove the M2 plastic holder.
  • Use the +J000 screwdriver to unscrew and remove the M2 plastic holder.

Remove black tape from ribbon cable and separate the cable from the soundboard.
  • Remove black tape from ribbon cable and separate the cable from the soundboard.

Use the +J000 to remove three screws from soundboard.
  • Use the +J000 to remove three screws from soundboard.

  • Keep the screws together and organized. (Label, if necessary).

Remove soundboard which has the headphone jack attached to it. Remove soundboard which has the headphone jack attached to it.
  • Remove soundboard which has the headphone jack attached to it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tyler Ellis

Member since: 10/28/2015

635 Reputation

4 Guides authored

Team

UMass Dartmouth, Team 3-6, Shastany Fall 2015 Member of UMass Dartmouth, Team 3-6, Shastany Fall 2015

UMASSD-SHASTANY-F15S3G6

4 Members

5 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 11

All Time: 357