Introduction

Locate and remove your hard drive for replacement or upgrade.

Flip the laptop over and remove the two 4mm screws located at the bottom of the laptop with the PH0 screwdriver.
  • Flip the laptop over and remove the two 4mm screws located at the bottom of the laptop with the PH0 screwdriver.

Add Comment

Using a plastic opening tool or finger, remove the access panel.
  • Using a plastic opening tool or finger, remove the access panel.

  • Apply constant force until the panel releases from the clips underneath.

Add Comment

Deck the Halls
With tools and Fix Kits
Locate the two, 4mm screws on the hard drive.  Remove them with the PH0 screwdriver.
  • Locate the two, 4mm screws on the hard drive. Remove them with the PH0 screwdriver.

Add Comment

Using the black tab located on the hard drive, pull out the hard drive.
  • Using the black tab located on the hard drive, pull out the hard drive.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Trevor Sprosty

Member since: 01/23/2017

370 Reputation

3 Guides authored

Team

Cal Poly, Team 22-11, Maness Winter 2017 Member of Cal Poly, Team 22-11, Maness Winter 2017

CPSU-MANESS-W17S22G11

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 11

All Time: 83