Introduction

The access panel is a metal and plastic piece that encapsulates and protects the inner mechanical parts of a laptop. Be sure to have a compatible back panel for this laptop when replacing it.

Parts

No parts required.

With the laptop facing down, rotate it so the battery pack is facing away from you. Remove the six 1.5 mm Phillips #1 screws on the back panel of the laptop.
  • With the laptop facing down, rotate it so the battery pack is facing away from you.

  • Remove the six 1.5 mm Phillips #1 screws on the back panel of the laptop.

Add Comment

Insert a finger into one of the slots on the bottom panel. Gently lift the upwards, and the back panel of the laptop will come off easily. Gently lift the upwards, and the back panel of the laptop will come off easily.
  • Insert a finger into one of the slots on the bottom panel.

  • Gently lift the upwards, and the back panel of the laptop will come off easily.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mikel Sangroniz

Member since: 04/25/2014

192 Reputation

1 Guide authored

Team

Cal Poly, Team 10-56, Amido Spring 2014 Member of Cal Poly, Team 10-56, Amido Spring 2014

CPSU-AMIDO-S14S10G56

4 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 571