Skip to main content

Asus DRW-B241 Belt Repair

What you need

    • Insert a "straightened" paper clip into the tiny hole above and slightly to the left of the open & close button.

    • Using a non-magnetized screwdriver, remove the 4 Phillips screws on the bottom of the case.

    • Using a non magnetized flat screwdriver, push in the faceplate tabs on the sides and bottom of the case. Once this loosens the faceplate, gently pry the top edge free.

    • The top part the the case will now lift off of the drive. With the tray extended open, you'll see two wheels near the front, the left one being larger than the right one.

    • Loop the rubber band around the 2 aforementioned wheels, re-assemble your drive, reinstall the drive in your computer, and you're good to go.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Doug Tom

Member since: 05/12/12

115 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 7

All Time: 961