Introduction

For this model computer removing the keyboard panel is always going to be the first step because it is the only way to access all the key parts.

Flip the Chromebook over so that the underside is facing up. Using the Phillips PH #000 screwdriver, remove the 11 "4mm" screws on the back of the device. Using the Phillips PH #000 screwdriver, remove the 11 "4mm" screws on the back of the device.
  • Flip the Chromebook over so that the underside is facing up.

  • Using the Phillips PH #000 screwdriver, remove the 11 "4mm" screws on the back of the device.

Add Comment

Wedge the plastic opening tool between the bottom cover of the laptop and the keyboard panel.
  • Wedge the plastic opening tool between the bottom cover of the laptop and the keyboard panel.

  • Apply pressure and move the plastic opening tool around the border of the laptop until it pops out.

Add Comment

Once the keyboard panel pops out, slowly move it upwards so that the keyboard connection is visible. Remove the keyboard connection from the motherboard by pulling it outwards from the connector.
  • Once the keyboard panel pops out, slowly move it upwards so that the keyboard connection is visible.

  • Remove the keyboard connection from the motherboard by pulling it outwards from the connector.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Juan Pericas

Member since: 10/02/2017

101 Reputation

1 Guide authored

Team

USF Tampa, Team S6-G4, Remmell Fall 2017 Member of USF Tampa, Team S6-G4, Remmell Fall 2017

USFT-REMMELL-F17S6G4

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 51