Introduction

If you are having trouble with your mouse pad picking up inputs than this guide could be useful. This process is easy just be careful when prying or removing wires to avoid damage.

  1. Place device  bottom-side up.
    • Place device bottom-side up.

  2. Remove the eight 9.0 mm Philips screws along the perimeter of the case.
    • Remove the eight 9.0 mm Philips screws along the perimeter of the case.

    • Remove the three 6.0 mm Philips screws from the center of the case.

    • Using a plastic opening tool, separate the bottom case at the steam.

    • Open the Chromebook at hinges.

    • Use plastic opening tool to pry open clip holding keyboard wires to the circuit board.

    • Use plastic opening tool to pry open clip holding mouse pad wires to circuit board.

    • Lift and remove keyboard from device. The keyboard and Mouse pad are one part that must be replaced simultaneously.

Conclusion

To reassemble your device, follow these instructions in reverse order.

wyatt boyatt

Member since: 09/25/2017

502 Reputation

5 Guides authored

Team

USF Tampa, Team S4-G3, Eyestone Fall 2017 Member of USF Tampa, Team S4-G3, Eyestone Fall 2017

USFT-EYESTONE-F17S4G3

3 Members

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 40