Introduction

If your keyboard is not working this guide will be very useful. There is not much that can go wrong with this but as always be wary when unplugging wires as to avoid tearing.

Place device  bottom-side up.
  • Place device bottom-side up.

Add Comment

Remove the eight 9.0 mm Philips screws along the perimeter of the case.
  • Remove the eight 9.0 mm Philips screws along the perimeter of the case.

  • Remove the three 6.0 mm Philips screws from the center of the case.

Add Comment

  • Using a plastic opening tool, separate the bottom case at the steam.

Add Comment

  • Open the Chromebook at hinges.

Add Comment

  • Use plastic opening tool to pry open clip holding keyboard wires to the circuitboard.

Add Comment

  • Use plastic opening tool to pry open clip holding mouse pad wires to the circuit board.

  • Use plastic opening tool to pry open clip holding keyboard flat black wire

  • Use plastic opening tool to pry open clip holding keyboard thiner white wire

Add Comment

  • Lift and remove keyboard from device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

wyatt boyatt

Member since: 09/25/2017

502 Reputation

5 Guides authored

Team

USF Tampa, Team S4-G3, Eyestone Fall 2017 Member of USF Tampa, Team S4-G3, Eyestone Fall 2017

USFT-EYESTONE-F17S4G3

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 8

All Time: 105