Introduction

If the laptop powers on when the charger connected, but fails to power on or stay on when disconnected, then your battery may need to be replaced. This guide will show you how to replace the battery. There are no tools needed.

Tools

Parts

No parts required.

Hold the laptop using both hands with the battery facing upwards.
  • Hold the laptop using both hands with the battery facing upwards.

Add Comment

Push the two tabs located below the battery in towards each other using your thumbs.
  • Push the two tabs located below the battery in towards each other using your thumbs.

Add Comment

Push the battery upwards and out of the laptop as shown.
  • Push the battery upwards and out of the laptop as shown.

Add Comment

Continue to push the battery upwards until it is completely separated from the laptop as shown.
  • Continue to push the battery upwards until it is completely separated from the laptop as shown.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Joe Capriola

Member since: 03/21/2016

360 Reputation

3 Guides authored

Team

Clemson, Team 7-4, Benson Spring 2016 Member of Clemson, Team 7-4, Benson Spring 2016

CLEM-BENSON-S16S7G4

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 13

All Time: 247