Introduction

The guide allows for you to take apart and replace the channel selection switch on an Astro A50 gaming headset with only a Phillips head screwdriver.

Parts

No parts required.

Remove the foam ear padding by pulling it straight to you
  • Remove the foam ear padding by pulling it straight to you

Add Comment

Remove the four 3.5mm Phillips head screws circled in red, and remove the grey cover
  • Remove the four 3.5mm Phillips head screws circled in red, and remove the grey cover

Add Comment

  • Remove the four 3.5mm Phillips head screws circled in red and remove the silver cover.

Add Comment

  • Remove the motherboard remove the four 3.5mm long Phillips head screws circled in red.

  • Remove the 3.5mm Phillips head screw circled in blue to remove secondary motherboard.

Add Comment

  • Separate the secondary mother board from the motherboard by pulling firmly to the right on the white connector.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

William Czerwonka

Member since: 09/21/2017

201 Reputation

2 Guides authored

Team

IUPUI, Team S1-G1, Baechle Fall 2017 Member of IUPUI, Team S1-G1, Baechle Fall 2017

IUPUI-BAECHLE-F17S1G1

2 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 16

Past 30 Days: 77

All Time: 682