Introduction
In this step we will be removing both dials on the front of the mixamp. This is mainly to reach the internal portions of the mixamp.
WARNING: The dials may be stuck or very difficult to remove. This requires a great amount of strength or a spudger to pry it off.
What you need
-
-
Remove the dials using either a metal spudger or your hands. Be careful as the dials may be difficult to remove.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 20-18, Maness Winter 2015 Member of Cal Poly, Team 20-18, Maness Winter 2015
CPSU-MANESS-W15S20G18
4 Members
10 Guides authored
