Introduction

In this guide you will learn how to remove and replace the kickstand on the Archos 70b. This is an easy replacement guide, the only difficult part is opening the device.

Parts

No parts required.

Remove all the tape and plugs to access the screws beneath.
  • Remove all the tape and plugs to access the screws beneath.

Add Comment

Unscrew all 5 of the .3mm t4 screws from the back plate of the device.
  • Unscrew all 5 of the .3mm t4 screws from the back plate of the device.

Add Comment

Black Friday
Broken doesn't stand a chance.
Gently go around the outside of the back plate and pry the back cover off.
  • Gently go around the outside of the back plate and pry the back cover off.

Add Comment

Remove the small blocking between the battery and stand
  • Remove the small blocking between the battery and stand

  • Push the pin towards the battery until completely free

Add Comment

Remove stand
  • Remove stand

  • The stand should easily slide out once the pin is removed

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Joshua Stoddard

Member since: 10/28/2015

529 Reputation

3 Guides authored

Team

UMass Dartmouth, Team 1-3, Miles Fall 2015 Member of UMass Dartmouth, Team 1-3, Miles Fall 2015

UMASSD-MILES-F15S1G3

3 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 277