Introduction

Replace your hard drive in your Apple TV 1st Generation.

Parts

No parts required.

  1. Remove the four T8 Torx screws securing the hard drive to the lower case.
    • Remove the four T8 Torx screws securing the hard drive to the lower case.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Peel and remove the hard drive up off the lower case.
    • Peel and remove the hard drive up off the lower case.

    • The hard drive is held on to the lower case with mild adhesive.

    • Disconnect the hard drive data cable from its socket on the hard drive.

    • If you are replacing your hard drive, ensure to transfer the hard drive data cable to your new hard drive.

    • Hard drive remains.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

9 other people completed this guide.

Celerityblur

Member since: 10/29/2009

154 Reputation

2 Guides authored

Team

Cal Poly, Team 18-5, Maness Fall 2009 Member of Cal Poly, Team 18-5, Maness Fall 2009

CPSU-MANESS-F09S18G5

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 10

All Time: 20,208