Introduction

This guide will show you how to replace the directional buttons in case they get jammed or break.

  1. At the bottom of the camera you will see the battery compartment cover as seen in the picture
    • At the bottom of the camera you will see the battery compartment cover as seen in the picture

    • To open this compartment, apply pressure in the direction of the arrow and remove it.

    Add Comment

  2. Remove the 1mm screws above and below the screwdriver.
    • Remove the 1mm screws above and below the screwdriver.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the 1 mm screw shown in the picture

    Add Comment

    • Once all previous screws have been removed, remove the panel.

    Add Comment

    • Now remove the directional button.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Isaac Saron

Member since: 03/20/2017

516 Reputation

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 74