Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

This guide takes you step by step through the process required to remove the buttons on the Amazon Fire remote. This task is simple and should not take more than a few minutes. To complete this you will need a plastic opening tool, triangle screwdriver, and a pair of precision tweezers. If you follow the easy steps you will successfully remove the buttons on the remote.

  1. To remove the buttons use the blue plastic opening tool to pry out the outer ring. To remove the buttons use the blue plastic opening tool to pry out the outer ring. To remove the buttons use the blue plastic opening tool to pry out the outer ring.
    • To remove the buttons use the blue plastic opening tool to pry out the outer ring.

  2. Remove the inner disk. Remove the inner disk.
    • Remove the inner disk.

  3. Remove the 6mm triangle screw. Remove the 6mm triangle screw.
    • Remove the 6mm triangle screw.

  4. Remove top plate using plastic opening tools. Remove top plate using plastic opening tools.
    • Remove top plate using plastic opening tools.

  5. Use tweezers to push out the buttons. Use tweezers to push out the buttons.
    • Use tweezers to push out the buttons.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sami Uzzama

Member since: 07/12/2016

378 Reputation

2 Guides authored

Team

IUPUI, Team 2-3, Harley SU 2016 Member of IUPUI, Team 2-3, Harley SU 2016

IUPUI-HARLEY-SU16S2G3

4 Members

10 Guides authored

2 Comments

Where do you get the replacement parts

Chris S - Reply

You could probably find them on eBay.

mrmanman -

Add Comment

View Statistics:

Past 24 Hours: 21

Past 7 Days: 107

Past 30 Days: 436

All Time: 9,724