Introduction

This device has a 2 megapixel Rear-facing camera and this guide will help you locate and replace this part.

Image 1/3: Work your way around the device to free all the clips. Image 2/3: Work your way around the device to free all the clips. Image 3/3: Work your way around the device to free all the clips.
  • Insert the plastic opening tool behind the rear case to free the clips holding the case together.

  • Work your way around the device to free all the clips.

Add Comment

Image 1/1: Once all clips have been released, the back case can be pulled free to reveal the inside of the device.
  • There are an additional nine clips surrounding the battery area. Place the plastic tool into the clips and lift to disconnect them.

  • Once all clips have been released, the back case can be pulled free to reveal the inside of the device.

Add Comment

Image 1/1:
  • Use a nylon spudger to unclip the connection from the motherboard.

Add Comment

Image 1/2: The camera lens are sensitive. Be careful when removing and handling camera. Image 2/2: Once freed from the screws, gently lift and remove the camera.
  • Unscrew the two screws using a T5 screwdriver.

  • The camera lens are sensitive. Be careful when removing and handling camera.

  • Once freed from the screws, gently lift and remove the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Omir Rosado

Member since: 09/30/2016

546 Reputation

5 Guides authored

Team

USF Tampa, Team 4-4, Passmore Fall 2016 Member of USF Tampa, Team 4-4, Passmore Fall 2016

USFT-PASSMORE-F16S4G4

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 106