Fix Your Stuff Community Store

Altec Lansing VersA Smart Bluebooth Board Replacement

Introduction

If you are having issues with Bluetooth connection or powering up your device, this guide will show you how to remove and replace the daughterboard that connects to the Bluetooth and power buttons.

What you need

  1. Altec Lansing VersA Smart Bluebooth Board Replacement, External Panels: step 1, image 1 of 1

    • Remove external rubber cover.

    Edit

  2. Altec Lansing VersA Smart Bluebooth Board Replacement: step 2, image 1 of 2 Altec Lansing VersA Smart Bluebooth Board Replacement: step 2, image 2 of 2

    • Use blue plastic opening tool to remove the external speaker face by placing it in the slight opening at the bottom.

    • Use a lever motion, push the tool down, lifting the speaker face.

    • Use fingers to grip and remove speaker face.

    • Repeat on reverse side to remove the second speaker face.

    Edit

  4. Altec Lansing VersA Smart Bluebooth Board Replacement: step 3, image 1 of 2 Altec Lansing VersA Smart Bluebooth Board Replacement: step 3, image 2 of 2

    • Orient speaker so volume buttons are facing away from you, and Bluetooth and power buttons are on the left-hand side.

    • Remove the seven 14mm screws using the Phillips #1 screwdriver.

    Edit

  5. Altec Lansing VersA Smart Bluebooth Board Replacement: step 4, image 1 of 1

    • Reorient speaker so Bluetooth and power buttons are now on the right-hand side.

    • Separate the two panels along the crease.

    • Blue plastic opening tool may be needed to separate panels.

    • Remove the panel with no buttons to expose internal area of the device.

    • Motherboard and all internal components are under this panel.

    Edit

  6. Altec Lansing VersA Smart Bluebooth Board Replacement, Bluebooth Board: step 5, image 1 of 1

    • Detach the wiring piece, located in the upper right corner of the motherboard.

    Edit

  7. Altec Lansing VersA Smart Bluebooth Board Replacement: step 6, image 1 of 2 Altec Lansing VersA Smart Bluebooth Board Replacement: step 6, image 2 of 2

    • Remove the daughterboard piece from its designated slot, located to the right of the motherboard.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 5

All Time: 699