Introduction

How to remove and replace the Base Cover.

Parts

No parts required.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Turn the computer over.

  2. Loosen the eight captive screws that secure the base cover to the computer base.
    • Loosen the eight captive screws that secure the base cover to the computer base.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Lift the base cover off the computer base.
    • Lift the base cover off the computer base.

  5. Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.
    • Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.

  6. Tighten the eight screws that secure the base cover to the computer base.
    • Tighten the eight screws that secure the base cover to the computer base.

Finish Line

2 other people completed this guide.

darrius

Member since: 03/26/2018

5,072 Reputation

30 Guides authored

Team

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

15 Members

925 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 43