Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Parts

No parts specified.

    • Remove the screws that secure the status-light board to the palm-rest assembly.

  1. Lift the status-light board off the palm-rest assembly.
    • Lift the status-light board off the palm-rest assembly.

  2. Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.
    • Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.

  3. Replace the screws that secure the status-light board to the palm-rest assembly.
    • Replace the screws that secure the status-light board to the palm-rest assembly.

  4. Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.
    • Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.

Terrence15

Member since: 12/18/2017

71,296 Reputation

442 Guides authored

Team

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

14 Members

926 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 72